A new OpenRC Tractor tool is out! Makit presents…THE CULTIVATOR
After a few months, it was about time to release a new OpenRC tractor tool. In this case it's a spring loaded cultivator. It levels the surface of soil to prepare a perfect seed-bed. As it is spring loaded, it's suitable for use in stone and root obstructed soil. If one tine strikes a hidden object, the others will continue working at the correct depth. Get it from MyMiniFactory
List of materials:
Plastic parts, screws and nuts, extension springs
- 4 x M3x20mm screws
- 4 x M3x16mm screws
- 13 x M3x12mm screws
- 19 x M3 nuts (other option)
- 4 x M3 self locking nuts
- 7 x approx. 30mm length, 8mm diam extension springs Option1, Option2, Option3
- 7 x Servo mini self-tapping screws
- Screwdrivers (check this one out!)
All parts print without supports and are exported with the right orientation to import directly to your favourite slicer.
I printed the leveling wheels with semiflexible filament to get a better look and touch.
Use the pictures to help you assemble your cultivator. It shouldn't be too difficult. In case you have some problems, you can write me in the comments section and I'll try to help.
Now, choose your colours and put your printer to work!