In this activity you’ll program your first Arduino code.
This code turns a LED on for a second, then off for one second, repeatedly. You can find this code under Arduino IDE -> File ->Examples -> Basics ->Blink
You don’t need any extra components as it uses a LED connected to pin13 that most Arduino boards have.
If you have a 3D printer, congratulations!, you can print your own Humbot! You can find the design files in Pinshape following this link: Humbot Sargantana on Pinshape You’ll have to follow your printer instructions and settings. However, we help you with the settings we used: Material: PLA Layer […]